FUNLAB Luminous Joy-Pad User Guide

Product Specification

On/Off Operation

1. Turn On: Hold Pairing Button (side) for **3 seconds**. Auto-shutdown after 2.5 mins if unpaired.
2. Auto-Shutdown: Powers off after 5 mins of inactivity (no movement/input).
3. Reconnect: Press Home Button after auto-shutdown to turn on/reconnect.
4. Manual Off: Hold Pairing or Home Button for **3 seconds**.
   1. To restart: Press Home Button for **1 second**.

Wireless Mode

• Pairing: Hold Pairing Button for 3 seconds.
  • LEDs 1-4 flash rapidly during pairing → steady on when connected.

Turbo and Auto Turbo Function

1. Set Turbo for Any Button

• Press TURBO + [A/B/X/Y/L/R/ZL/ZR/D-pad/SR/SL]:
  • 1st press: Manual Turbo (hold to repeat).
  • 2nd press: Auto Turbo (continuous press).
  • 3rd press: Clear Turbo.
• Stop Auto Turbo: Press the button alone; press again to resume.
• Clear All Turbo: Hold TURBO for 5 seconds (vibration confirms).

2. Turbo Speed Adjustment

• Levels:
  • Level 1: 5x/sec
  • Level 2: 12x/sec
  • Level 3: 20x/sec
• Adjust:
  • Speed ↑: **TURBO + Tilt joystick up**.
  • Speed ↓: **TURBO + Tilt joystick down**.

Vibration Adjustment

• Press Vibration Button (back) to cycle intensities:
  • 70% → 50% (default) → **0%**.

Reset & Reconnection

• Hardware Reset: Press Reset Button (small hole on back of each handle).
• Reconnect to Last Device: Press Home Button while in standby.

Charging Indicators

Low Voltage Protection

Lighting Control

1. Side + Surface Lights

• Single Click: Solid color (cycles: blue/red/yellow/green/purple/orange/white).
• Double Click: Breathing mode (auto color shift).
• Off: Double-click again.

2. Side Light Only

• Single Click: Solid color (same cycle).
• Double Click: Breathing mode.
• Off: Double-click again.

Brightness Adjustment:

Macro & Mapping Function

1. Macro Buttons

• Hold M Button (right/left) + input sequence (≤20 steps).
• Release → vibration → press MR/ML to trigger.
• Compatible buttons: A/B/X/Y/L/R/ZL/ZR/±/D-pad/joysticks.

2. Programmable Buttons

• Hold M Button (right/left) + press target button.
• Release → vibration → press MR/ML to trigger.

Notes:

• Left M configures left handle only; right M configures right handle.
• Clear macros/mapping: Hold M Button until vibration → release.

Keylinker App Instructions

1. Download "Keylinker" from app store.
2. Open app → enable Bluetooth.
3. Select "KEYLINKER BLE" to connect.
4. Tap ⚙️ (settings) to customize:
   1. Button remapping, lighting, vibration, etc.

Support

• Website: www.funlabswitch.com
• Email: support@funlabswitch.com
• Instagram: @funlab_official
• X: @Funlab_switch
• TikTok: @funlab.official
• YouTube: @funlabswitch
• Facebook: @funlabswitch
• FUNLAB Official Discord Server