FUNLAB Lumindock Multifunctional Docking Station User Guide

Product Specifications

Key Components

• Joy-Con Charging SlotsCharge Joy-Con controllers (controllers not included).
• Ports:
  • USB 2.0 × 1
  • USB 3.0 × 2
  • Type-C × 1
  • HDMI × 1
• Buttons:
  • Projection Button: Switch between TV/Desktop modes.
  • Light Button: Control LED panel.
• Indicators:
  • TV Output LED (blue in TV mode).
  • Luminous Panel (color customizable).

How to Use

1. TV Mode (Console Projection)

1. Connect power using Switch adapter or ≥39W PD adapter.
2. Slide console into the dock slot → Luminous panel glows red.
3. Connect HDMI cable:
   1. Dock end → HDMI port
   2. TV end → HDMI inputNote: Use Nintendo HDMI cable or verified working cable.
4. Press Projection Button:
   1. TV Mode: Blue LED lights up (screen displays on TV).
   2. Desktop Mode: LED turns off.
5. Console charges while docked.One-Touch Wake (Chinese manual): Press HOME on controller to wake sleeping console.

2. USB Charging Ports

1. Connect power (≥39W adapter).
2. Plug in wired controllers/USB devices to play or charge.Note: Use ≥2A USB cables (max 2m length) for efficiency.

3. Joy-Con Charging Slots

1. Connect power (≥39W adapter).
2. Slide Joy-Cons into slots → Indicator lights up.
   1. Charging: Red light
   2. Fully Charged: Solid green
   3. No Power: No light

Light Control

• Change Mode: Double-click Light Button:
  • Always-On → Energy-Saving → Breathing → Light-Off.
• Change Color: Click Light Button (in any mode).
• TV Mode Default: Breathing mode.Hold Light Button 3s to customize.
• Desktop Mode: Follow above steps directly.

Health & Safety

1. Use only ≥39W Switch/PD adapter.
2. Do not disassemble – seek qualified technicians.
3. Avoid humidity, water, rain, fire, microwaves, high heat, or direct sunlight.
4. Follow all instructions to avoid voiding warranty.
5. Do not use voltage-reducing transformers/plugs.

Troubleshooting

TV Dock Not Working?

1. Check TV/monitor **HDMI input selection**.
2. Use a verified HDMI cable (e.g., Nintendo original).
3. Ensure dock power adapter is connected to a working outlet.
4. Reinsert console into dock.
5. Reconnect HDMI cable.
6. Ensure ventilation (docks generate heat) – do not block side vents.

Support

• Website: www.funlabswitch.com
• Email: support@funlabswitch.com
• Instagram: @funlab_official
• X: @Funlab_switch
• TikTok: @funlab.official
• YouTube: @funlabswitch
• Facebook: @funlabswitch
• FUNLAB Official Discord Server